@robodaz999
active 6 months, 3 weeks ago-
Robodaz commented on the post, 1/72 German E-100 Ausf.Sechsfuessler Nothung by Rocket Models – Build 6 months, 3 weeks ago
Plenty more, but each one does not stay in production long.
Also, I see only rare re-issues.
HLJ will always get then on initial release though. -
Robodaz commented on the post, 1/48 Space:1999 Eagle Transporter by MPC/Round 2 – Part Two – Review 8 months, 1 week ago
Aye, surely.
Share them here that we may all see and get in on the chatter. Round 2 are still on the go, as you know and not done yet with Space 1999. -
Robodaz posted an update 2 years, 2 months ago
Bit quiet in here.
I wonder if I am needed here any more. -
Robodaz commented on the post, 1/35 Luna Diver Stingray "Operation Dynamo" by Hasegawa – Build 2 years, 6 months ago
I use Mr. Hobby lacquer, Tamiya Acrylics, and Alclad metals for airbrushing. However, I use Citadel Acrylics for hand painting (if only out of nostalgic attachment). For the pipes, it was all Citadel both in the cockpit and on the ship surface.
-
Robodaz commented on the post, 1/35 Luna Diver Stingray "Operation Dynamo" by Hasegawa – Build 2 years, 6 months ago
Thank you!
All the cockpit wires I just dry-brushed in, carefully with a mid range brush. Took a few layers to get the right depth of colour.
Then it was just a bit of covering with a wash of Nuln Oil (Citadel Paints) and it was job done. Quick n dirty, I know, but I love speed builds. 🙂 -
Robodaz wrote a new post, 1/3 Fate/Apocrypha: Ruler (Obitsu 50cm/AZO2 Body) by Azone – Review 2 years, 6 months ago
One Doll to Rule Them All?
One of the main features of the “Fate” series of games/comics/animation is that the protagonists of the story employ a series of servants, who represent a variety of archetypes – each […]
-
Nice!!
-
this is huge…
-
-
Robodaz wrote a new post, 1/3 Fate/Apocrypha: Ruler (Obitsu 50cm/AZO2 Body) by Azone – Unbox 2 years, 6 months ago
Censorship, or Market Forces? Fate: Stay Night
in 2004, when working at a hobby store in Kobe Centre Plaza, a little erotic PC game shop displayed an interesting poster for a game called “Fate: Stay Night” […]
-
Robodaz wrote a new post, 1/35 Luna Diver Stingray "Operation Dynamo" by Hasegawa – Build 2 years, 7 months ago
Available from HobbyLink Japan here.
“Ma.K” is more than models, more than a narrative — it is a community built over the decades around designs which wear their cobbled and kitbashed nature on their sleeves […]
-
Thank you!
All the cockpit wires I just dry-brushed in, carefully with a mid range brush. Took a few layers to get the right depth of colour.
Then it was just a bit of covering with a wash of Nuln Oil (Citadel Paints) and it was job done. Quick n dirty, I know, but I love speed builds. 🙂 -
I use Mr. Hobby lacquer, Tamiya Acrylics, and Alclad metals for airbrushing. However, I use Citadel Acrylics for hand painting (if only out of nostalgic attachment). For the pipes, it was all Citadel both in the cockpit and on the ship surface.
-
-
Robodaz commented on the post, 1/35 Luna Diver Stingray "Operation Dynamo" Unboxing 2 years, 7 months ago
I have not, so far. I don’t really have a good video set up, ATM.
However, you are not the first to ask this, and it is a logical next step – photos can only tell so much, after all.Thanks
-
Robodaz wrote a new post, 1/35 Luna Diver Stingray "Operation Dynamo" Unboxing 2 years, 7 months ago
Available from HobbyLink Japan here.
Kitbashers!? Article Bashers! 😀
Yes, blatantly lifting part one from an earlier Ma.K review, as I could not say that same thing better than I did there.
Yokoyama Kow is one […]
-
Do you upload videos on how you assemble the pieces?
-
I have not, so far. I don’t really have a good video set up, ATM.
However, you are not the first to ask this, and it is a logical next step – photos can only tell so much, after all.Thanks
-
-
-
Robodaz commented on the post, 1/72 German E-100 Ausf.Sechsfuessler Nothung by Rocket Models – Build 2 years, 8 months ago
The enormous decal does not help much either.
-
Robodaz wrote a new post, 1/72 German E-100 Ausf.Sechsfuessler Nothung by Rocket Models – Build 2 years, 8 months ago
1/72 German E-100 Ausf.Sechsfuessler Nothung – Available from HobbyLink Japan here.
Looking to the Past to imagine the Future (…in the past)
I’ve often heard it said science fiction is not a way to test the […]
-
I must say that turret is ridiculously small when compare to the hull
-
The enormous decal does not help much either.
-
Plenty more, but each one does not stay in production long.
Also, I see only rare re-issues.
HLJ will always get then on initial release though.
-
-
Robodaz wrote a new post, 1/72 German E-100 Ausf.Sechsfuessler Nothung by Rocket Model – Unbox 2 years, 8 months ago
1/72 German E-100 Ausf.Sechsfuessler Nothung by Rocket Model – Available from HobbyLink Japan here.
The Future Past
Since the heyday of the late 80s, when Kow Yokoyama created a new wave of alternative history […]
-
Robodaz changed their profile picture 2 years, 8 months ago
-
Robodaz became a registered member 2 years, 8 months ago
-
Robodaz wrote a new post, 1/72 Multi-turreted Tank Akuyaku #1 Short Gun Barrel ver. by Platz – Part Two – Build 2 years, 10 months ago
Available from HobbyLink Japan here
Super Heavy
Since WWII, the tank has been thought of primarily as a way to rapidly deploy heavy anti material weapons directly into enemy formations, primarily aimed at […]
-
Robodaz wrote a new post, 1/72 Multi-turreted Tank Akuyaku #1 Short Gun Barrel ver. by Platz – Part One – Unboxing 2 years, 10 months ago
Available from HobbyLink Japan here
Some Animals are More Equal Than Others
Whilst many folks will only know Miyazaki Hayao from his film works, before his rise to fame, at the peak of his career and, so it is […]
-
Robodaz wrote a new post, 1/1000 Space Battleship Yamato 2202 by Bandai Build 2 years, 11 months ago
Available from HobbyLink Japan here
Where are the Days That have been?
[Spoiler Alert]As I have written elsewhere: In the sequel to Space Battleship Yamato 2199, the Andromeda class ships represent the way in […]
-
Robodaz wrote a new post, 1/1000 Space Battleship Yamato 2202 by Bandai Unboxing 2 years, 11 months ago
Available from HobbyLink Japan here
Broken Promises, Renewed Hopes.
As I said in my Adndromeda review: “Remaking anything is a bit of a risk.Remaking one of the seminal moments of any point in history is […]
-
Robodaz wrote a new post, 1/35 Votoms Blood Sucker ST Ver. by Wave Build 2 years, 11 months ago
Available from HobbyLink Japan here
The Genius of Simplicity
Fans of the VOTOMS universe will often point to the nature of its tech as being one of the foundations of its ‘grounded’ nature. Certainly, whilst the […]
- Load More
