@teetee580 Hello friend. Did you finish the PG Unicorn?I just finished my and boy it was tough.Mainly because I tried to add 12 more LEDs to light up the Unchained parts.It was a failure as they didn’t light up the parts well as not enough clearance,or else would have had to make it non transformable(No way).But am still satisfied with the […] View
Hi Syd.I was like “face palm” when I saw you connect the waist,lolz. But I really enjoyed your build and can’t wait to start mine. I ordered 2 of these kits to get 2 swords. Now I really hope Bandai makes the Gold Frame Astray, although I think it’s technically impossible with gold plating.
I really wanted to get a metal gundam but after having built the PG Unicorn, the other Unicorn are underwhelming!Anyone having built the PG will understand! I just hope I get to buy the Metal build Amatsu when it comes out!!This one is overwhelming!!
Ok finally finished my PG Unicorn. Would have finished a week ago if I hadn’t tried to put LEDs to light up the Unchained Mode parts-but I found out it was futile unless I…
The top slides alright, but the Unicorn faceplate doesn’t rotate down enough to make clearance for the Destroy mode face to be tucked back inside. I have to apply a bit of pressure to make the neck bend back to make clearance.
Don’t worry: the V-fin just graze the edges and doesnt harm the paintjob. As for me I will have to gloss coat the head again as I mess it up while fighting with the head trying to look for a hidden articulation in it.
Btw do you you know how to enable auto light mode of the LEDs?I went all over the internet to finally find the answer in a…[Read more]
@teetee580 Hello friend. Did you finish the PG Unicorn?I just finished my and boy it was tough.Mainly because I tried to add 12 more LEDs to light up the Unchained parts.It was a failure as they didn’t light up the parts well as not enough clearance,or else would have had to make it non transformable(No way).But am still satisfied with the Bandai…[Read more]
Hello Hellvin. I’ve finished my PG Unicorn more then a month ago. And I have to say, I’m also a bit disappointed the biceps don’t light up, and the other unchained parts as well, so I never display it as such.
I too have some difficulties with transforming the head. From either modes back to the other.
I did see a review on YouTube by Jabman025.…[Read more]
Don’t worry: the V-fin just graze the edges and doesnt harm the paintjob. As for me I will have to gloss coat the head again as I mess it up while fighting with the head trying to look for a hidden articulation in it.
Btw do you you know how to enable auto light mode of the LEDs?I went all over the internet to finally find the answer in a…[Read more]
Did you try to transform it back to unicorn?Am having problem with the facemask.It doesn’t seem to have clearance to slide down enough when attached to the neck, to allow the destroy mode face to go back inside the head.
Hi teetee580. How r u doing?Thanks for the info.I bought some extra parts from Samuel and just ordered metal parts for my PG Unicorn.I’l get the decals in my next order.
Hi there. My very first kit was the 1/72 vf-25f Tornado messiah. Then I didn’t know you had to apply a clear coat to protect the decals and pretty much messed most of them. Can anyone tell me where I can get those decals without having to buy the kit again, as am planning to paint it and make it look nice!!
Hi Hellvin, I almost never visit this section, so sorry for taking so long. I just checked to be sure, and Samuel Decal sells them. I suggest getting in contact with him via FaceBook.
Good luck and happy building!
Hi teetee580. How r u doing?Thanks for the info.I bought some extra parts from Samuel and just ordered metal parts for my PG Unicorn.I’l get the decals in my next order.
yes, Samuel decals are way better than the bandai waterslides, I also had issues with the waterslides from the tornado messiah, some fell off before applying the top coat! Also had alot of issues with the fit of alot of pieces, transformation is nearly impossible whituot removing some pieces because of the fitting problems, I’m guessing my kit…[Read more]
the tornado messiah only includes the bad quality waterslides, so he had no other choice, and the setting solution don’t help on bandai waterslides, believe me, I’ve been there, the waterslides provided by bandai are so low quality that they actually disintegrate if you use microset, even with weaker solutions like the mark fit from tamiya you’ll…[Read more]
Hi !
I had missed it I think
it’s to say I didn’t kept the DXv2 more than a month, I sold it right away after I did a review with the 1/72 model kits…
Maybe those are clipping parts in the inner side of the back of the valk, but it’s obvious it’s on the DXv2 (renewal version)
So if you want this gimmick, you must take only renewal VF-25 😉
Anyone like me has been refreshing the HLJ page like a madman for 2 weeks waiting for the preorder of the Metal Build Amatsu to appear only to find that the preorder is already closed. It’s frame looks like the MG Astrays. Is it possible we’ll get an MG of it for Bandai to milk it more?I wouldn’t mind. Or does anybody know how to mod kits to…[Read more]
Hi there!Am surprised you compared the MK-III with a “small” MG but not with a big MG like the Sazabi or the Nu. I think it’s about the same size, thus confirming that an MG of this thing could be possible. As for the Unicorn, I was really hoping that the reflection from the LEDs would light up a bit the biceps’psychoframe and the ankle, but from…[Read more]