Activity

okie, this is just personal exp but, i’ve actually been having some decent luck using future.

i wet the spot first with future, then position the seal (sticker or waterslide), then once in position i dab it down with a bit more, making sure to get along any edges, as the future auto levels, it seems to fill in the edges, pretty much making them vanish.

There are many way to make it work.

I not sure about MicroSol, you might want to do some search on it.

Mark Softer. It work best with mark setter. This is the way how I do it, and I not sure others.
1. Wet the surface, lay your decal on the surface.
2. careful clear the water on the surface and under the decal with a saber brush.
3. then comb a thin layer of Mr. Mark Softer on it. (leave it.)
4. When you see the wink on it, comb it slowly and softly. then add more force on it once most mark softer is out. Apply a thin layer of Mr. Mark setter on the decal silvery line. brush it again.
5 leave it dry for 24 hours before you clear coat to seal the decal. (remember to clean the mark setter after you finish the step 4 immediately. because it will stain the paint and not able to removed.)
Cheers. 🙂