Public Group
Active 4 years, 9 months ago
About The Competition – http://hlj.com/plamo-2017
Intermediate Category
Making the model your own. Give it a whole new paint scheme or a look all its own. Perhaps some parts swapping with other kits.
Post at least 4 work in progress photos over the competition period into the group you have joined on hobbylink.tv. The first photo posted should be of the model kit box you intend to build.
Then Submit Final Entry – Make sure to read general rules before submitting –
http://hlj.com/plamo-2017#howto
P1090306-Edit
Yep, top notch!!!.
Thanks! : )
Looks great.
Super nice – do you know how to flat spot the wheels so it looks like it’s sitting on the ground? Risky once its put together probably but adds to the realism.
Thanks! This is how I do it, it should works on most kit except those with square wheel axle. Use the link for illustrated short version. https://www.flickr.com/photos/mr_beaver/32949650054/sizes/l
1. Test fit the wheel with landing gear with no glue. To be able to adjust the position of the flat spot later, it must rotate freely. If the fit is too tight, sand the axle until the fit is loose enough.
2. Sand the wheels together, assemble the wheels and put them side by side and wrap them tightly with masking tape. The idea is to sand all wheels together so the flat spot is the same on every wheels.
3. Sand with metal file! the flat spot on the wheels must be flat, so avoid using sand paper or sanding stick because they flex and bend when pressure was applied.