I think if i put my heart into this and not do nething but this i can get it done before saturday more is already painted but i just wanted to see something done
i finished modding my zeong and i started to paint it however when i did after the paint dried i could see the surface of the plastic to be all scratchy from sanding it down and such is there a way to get rid of that look like prime it or something??
What you can do is prime to see where it’s rough. If you use a grey primer then it’s easy to see changes in the surface and so, easy to try and fix. This is the best way I’ve found to smooth out plastic.
What Nick said is true, but you’ll be looking for a primer with “micro filler” added to it. Of course you need to sand it after priming it. For a flat paint, a 800 grid sandpaper will do, for gloss and metallics, a 1000 or 1200 grid sandpaper is needed. And you need to get a primer that is compatible with the paint you are using, provided you want…[Read more]
so i have to prime it with tamiyas since im using tamiya paints but after that i still have to resand it but wouldnt that create a more scratchy rough surface though??
If you are using the Tamiya acrylics, you can’t prime your parts with Tamiya Primer spray cans, nor the Tamiya Surface Primer which comes in a bottle. Both are lacquers and will ruin your messed up paint job even more!
There are two options for you, one being that you use some more paint to thicken the surface and then sand it smooth, the other is…[Read more]
Right now i already stripped off the original paint for the tamiya primer so all i have to do is prime it up then check for scratched surfaces then sand it n then re prime n then paint?
Some more in progress got the hands in started sealing some awful gaps. Tmr im gunna get that new back pack for this guy n then more sealing gaps and then painting
Schools started but comic con is only a few weeks till today so i have to get this done. Even though im the modeler i would like some opinion on how this is looking so far like maybe crticism or even ideas but im continuing on this massive project till the day its comic con
The kits coming together quite nicely, maybe scribe a few panel lines for added detail?
Also you may want to round a few of the edges to make them suit the rest of the model.
Thanks 🙂 theres still more work to be done on the chest and i will be doing scribing once all the clean up and scratching is done but i wasnt too sure if the legs should still be the same roundness since i was thinking about maybe making it blockier
recently i picked up the unicorn gundam code 852 version
even though it is a stunningly beutiful kit, its not undergated so obviously i want to at least hide the nub marks alittle bit by adding a dash of gold on the nubs but my problem is what kind of gold would be close to the gold they have on the unicorn???
I’ve looked up some pictures of the “Hong Kong” Ver.Ka. Unicorn and it looks like a very light “gold” plating.
I would try a dot of silver and a tiny drop of clear yellow, not the normal mix of yellow and orange.
Before i knew of this mix, I used normal clear yellow on top of silver and it turned out really light instead of a, if you will, deeper…[Read more]
It looks similar to the gold on the Hyaku Shiki, maybe you could try to flat coat some regular Tamiya Gold leaf or Gold gundam Marker on a spare piece or empty runner from the 852, then see how the close the golds look.
Actually @teetee580 the gold is darker than u think its more of a hyaku shiki gold i thought that too when i saw it but i was wrong
Although trying it on the runner or something is a good idea to do thanks guys
Finished snap building this bad boy. Finally put the drei zwerg to use. This will get a full paint, water slide and battle damage treatment once I start to get the backlog cleared out