-
Moldrunner posted an update in the group What are you building? 5 years, 9 months ago
What was planned, as an simple paintjob over a weekend, turned into a decent build, that takes me two weeks by now. Can’t tell what all went wrong with this thing. From a masking desaster, over old decals, that somehow affected my basecolor to a favorit detailbrush that startet splitting and made me put out my enamel colors from the 90s. That I almost spilled every liquid I worked with was the smallest problem. But finally I am at the process of panellining, that will be the last before assembling it.-
IMG-20170506-WA0004
-
IMG-20170508-WA0003
-
IMG-20170509-WA0003
-
IMG-20170510-WA0000
-
IMG-20170510-WA0010
-
IMG-20170511-WA0000
-
IMG-20170511-WA0004
-
IMG-20170511-WA0010
-
IMG-20170512-WA0004
-
IMG-20170512-WA0008
-
IMG-20170512-WA0010
-
IMG-20170512-WA0012
-
IMG-20170512-WA0016
-
IMG-20170514-WA0000
-
IMG-20170514-WA0008
-
IMG-20170514-WA0012
-
IMG-20170514-WA0015
-
IMG-20170514-WA0017
-
IMG-20170514-WA0020
-
IMG-20170514-WA0023
-
IMG-20170514-WA0025
-
IMG-20170514-WA0027
-
IMG-20170514-WA0033
-
I forgott to mention that I avoided masking after that first try and sparyed everything freehand and I did this with the 0.4 needle, that I use for cleaning, installed in the 0.2 setup of my spraygun. And I wondered, why I had to clean the nossle after each part and controlling the colorflow was so difficult…
Do not you foresee aging, scratches?
there is agentle,wathering on it, thats why I primed with black and put a silver coat under the actual basecolor. I went over all the edges with sanding paper. It is a very gentle weathering, but thats how it suoposed to be. If I feel like adding some scraches on the flat surfaces I will just scratch it, but this is sokething that is done on the assembled kit to make it work togetherm